How to Recovery WR1300 From OpenWRT Firmware to Cudy Official Firmware?

Cudy Home    Support页面    FAQ    How to Recovery WR1300 From OpenWRT Firmware to Cudy Official Firmware?

1. Download and unzip the file from here

2. Power off your WR1300.

3. Connect your computer the WR1300's LAN port with an Ethernet cable.

4. Manually configure your computer's IP address to be "192.168.1.88".

5. Run "tftp32.exe".

6. Press the "Reset" button and hold it. Before WR1300 is powered on and before tftp start to download the firmware, don't release the "Reset" button. 

7. Power on WR1300. 

8. When the LEDs of "SYS","USB","WPS" are all flashing fast, or when tftp start to download the firmware, you can release the “Reset” button.

9. When the LED of "SYS" flash slowly, the upgrade is complete.

10. Please recover your computer's IP address to be dynamic IP. 

11. Done.

 

2020年7月1日 15:17
Browsing amount:0
Collection