Home Page | Cudy  ꄲ  SMB  ꄲ  PoE Switches  ꄲ  10/100M  ꄲ  16-Port 10/100M PoE+ Switch with 2GbE and 1 SFP Port, Model: FS1018PS1
ꁆ ꁇ

16-Port 10/100M PoE+ Switch with 2GbE and 1 SFP Port, Model: FS1018PS1

  • FS1018PS1-1FS1018PS1-2

    FS1018PS1-380x380-1 FS1018PS1-380x380-2 FS1018PS1-380x380-3

    200 W Power budget & 30 W Maximum One Port

    Supports a total PoE power of 200 W and up to 30 W for one PoE port. Non-standard PoE devices or normal PoE switches are not burned. Meets IEEE802.3af / at standard.

    Watchdog guarantees uninterrupted operation of the PoE devices

    The PoE watchdog continuously monitors the connection status of remote hosts. If an error is detected on the remote PoE device, the PoE switch immediately restarts the device to bring it back to normal operation.

    Plug&Play, Fanless design

    Plug and Play, Easy of use.Fanless design for silent operation.Made of high-quality metal case, sturdy and durable with long service life, provide better heat dissipation, suitable for most environment. Pin assignment, Mode A: 1/2(+),3/6(-)
    GS1005P-380x380-1 GS1005P-380x380-2 GS1005P-380x380-3

    Surveillance

    Works with IP Cameras for home and office, small business

    VoIP Conference Call

    Works with VoIP phones for business conference

    Wi-Fi Coverage

    Works with WiFi APs for office and business

     

     

    Specifications

     

     

     

    Mode FS1018PS1
    Power Power Supply Built-in power supply
    Voltage Range AC100~240V
    Consumption 190W for 16 PoE
    Ethernet Speed 1~16 Port: 10/100/Mbps
    G17~G18 Port:10/100/1000Mbps
    G19 Port: SFP 1.25bps
    Transmission Distance 100Meter(328ft)for RJ-45
    The distance is determined by the optical module
    The optical module is optional
    Network
    Switch    		 Ethenet Standard IEEE 802.3 802.3u 802.3ab 802.3af/at
    Switching Capacity 7.2G
    Transfer Rate 14880 pps for 10Mbps
    148800 pps for 100Mbps
    1488000 pps for 1000Mbps
    MAC Adsress 4K MAC sddress table 
    Link/ACT On(Green) The port is connecting
    Blinks The port is receiving or transmitting data.
    Off The port is notl inked successfully with the device
    POE On(Oranfe) PD is connected
    Off No PD is connected or power forwarding fails
    PoE Pin Assignmnet V+(RJ45 Pin 1, 2) - (RJ45 Pin 3,6)
    Environment Working Temperature  0~40°C
    Storage Temperature -40~70°C
    Humidity Non Condesing 0~85%
    Mechanical Dimension L*W*H 280*180*44mm
    Color Gray
● 200 watts PoE power supply, up to 30 watts per port
● 2 10/100/1000M uplink ports +1 SFP Port
● 16 10/100M PoE+ ports 
● CCTV mode support remote PoE feeding up to 250m
● VLAN mode isolate each PoE Ports for security
● IEEE 802.3at / IEEE 802.3af standard compliant
● Plug&play, simple setup with no configuration needed
● Watchdog reactivates the abnormalPD by resuming POE power