10/100/1000M Gigabit Ethernet Media Converter MC100G, Status EOL
-
General description
This product supports IEEE802.3 10 Base-T standard/IEEE 802.3u 100Base-TX/FX standard IEEE 802.3z 1000Base-TX/FX standard, IEEE 802.3x Flow control standard as well as full duplex and half duplex mode.
The media converter transforms the transmission media of Ethernet signal from CAT5 100m to optical fiber 850/1310/1550nm. It can extend the transmission distance to several kilometers or hundred kilometers.
All Media converters apply the new 0.25µm technology to improve the performance and to avoid the packet lost with long the transmission. It also reduce the delay time to less than 9.6 µs.
Using media converter is an economical solution to achieve long distance transmission base on current status.Product classification and LED
ACCORDING TO OUTLINE 90V~240V AC - 50/60Hz or -48VDC input power
standalone media converter;
+5V DC input power standalone media converter
with external switching adaptor;
Optional USB PORT or +5V DC input power
standalone media converter;
Media converter Card; Rack System Chassis(2U)
ACCORDING TO QUANTITY of FIBER Single fiber bidirectional media
converter, Dual fiber media converter
ACCORDING TO TYPE OF FIBER Multimode media converter, Single mode
media converter
+5V DC input power standalone media converter can be applied for 14 slots
rack mounted chassis, media converter Card applied for 16 slots rack
mounted chassis
Front panel for single fiber media converter Front panel for dual fiber media converter LED Function Description
Explanation for LED indicator lamp LED indicator lamps serve as device monitoring and trouble display. The following is the explanation for each LED indicator lamp.
LED Function STATUS DESCRIPTION PWR Power LED ON Power is ON OFF Power is Fail FX Fiber port signal
detect LEDON Laser is receiving OFF No laser input FX-LINK/ACT Fiber port link/action
status LEDON Fiber link is OK Blink Data is been received
or transmittedOFF Fiber link is fail 1000M UTP port speed LED ON 1000Mbps speed OFF 100Mbps speed TX-LINK/ACT UTP port link/action
status LEDON UTP link is OK Blink Data is been received
or transmittedOFF UTP link is fail FDX/COL UTP port duplex LED ON Full duplex OFF OFF Half duplex Model vs Specification
PN ƛ TX nm ƛ TX nm PTX dBm SEN dBm Overload dBm Distance Km Loss dB/km Connector MC100GMA-11-05AS 850 850 -8~-3 ≤-19 ≥-3 0.55 2.5 MM Dual SC MC100GMA-11-2AS 1310 1310 -8~-3 ≤-20 ≥-3 0.55 0.4 SM Dual SC MC100GSA-11-10AS 1310 1310 -8~-3 ≤-24 ≥-3 10 0.4 MC100GSA-11-20AS 1310 1310 -8~-3 ≤-24 ≥-3 20 0.4 MC100GSA-11-40AS 1550 1550 -5~0 ≤-24 ≥-3 40 0.25 MC100GSA-11-60A 1550 1550 -5~0 ≤-24 ≥-3 60 0.25 MC100GSB-11-10A-AS 1310 1550 -8~-3 ≤-24 ≥-3 10 0.4 SM BIDI SC MC100GSB-11-10B-AS 1550 1310 -8~-3 ≤-24 ≥-3 10 0.25 MC100GSB-11-20A-AS 1310 1550 -8~-3 ≤-24 ≥-3 20 0.4 MC100GSB-11-20B-AS 1550 1310 -8~-3 ≤-24 ≥-3 20 0.25 MC100GSB-11-40A-AS 1310 1550 -5~0 ≤-24 ≥-3 40 0.4 MC100GSB-11-40B-AS 1550 1310 -5~0 ≤-24 ≥-3 40 0.25 MC100GSB-11-60A-AS 1310 1550 -2~+3 ≤-24 ≥-3 60 0.4 MC100GSB-11-60B-AS 1550 1310 -5~0 ≤-24 ≥-3 60 0.25 -
-
● In conformity to IEEE 802.3u 100 Base-TX/FX standard
● In conformity to IEEE 802.3z 1000 Base-T
● In conformity to IEEE 802.3x Flow control stand
● Max. 2M buffer memory built in chip. Auto
● Automatic identification of MDI/MDI-X cross line
● High-performance1.4Gbps memory bandwidth